V-Tec VIDEO DOOR PHONE SYSTEM Instrukcja Obsługi Pobierz pdf (Strona 46)

BASIC SYSTEM DIAGRAMS

−−−−

sec.1a

DOOR PHONE SYSTEMS

DOOR PHONE - VIDEO DOOR PHONE SYSTEMS: Installation Diagrams

CONNECTION OF SEVERAL DOOR PHONES TO 1 DOOR UNIT

Solution using additional differential ﬂ oor call device Ref. 9854/53

6+(n-2)

6+(n-1)

6+n

9+n

FUNCTION

When one of the keys of the push button panel located outside

the building is pressed, the two-tone electronic call is sent to the

Loudspeaker of the matching door phone. When the handset of the

door phone called is lifted, the contact between the outside and inside

is established and the conversation can start. To activate the electric

lock, press the matching key.

Floor calls can be differentiated from door unit calls by ﬁ tting an

additional device inside each door phone.

The device must be powered either at 12Vdc or 12Vac. For powering

the device at 12Vac, simply include one extra wire in the column

connected to the door phone power unit terminal ~12. Use an additional

dc power unit Ref. 1090/850 to power the device is powered at

12Vdc.

EQUIPMENT

The following devices are needed for the system illustrated in diagram

SC101-1070C:

DOOR PHONE REFERENCES

N. X Door phone Mod. Utopia Grey colour Ref. 1134/1

N. X Door phone Mod. Atlantico White colour Ref. 1133

N. X Add-on device for call Ref. 9854/53

POWER SUPPLY FOR DOOR PHONE SYSTEM REFERENCES

N. 1 Power supply for

door phone system 28VA Ref. 786/11

N. 1 Additional power unit Ref. 1090/850

OUTDOOR STATION REFERENCES

Sinthesi model

N. X Button modules Ref. 1145/11-/12-/13-/14

N. 1 Module with door unit set-up Ref. 1145/20-/21-/22

N. 1 Ampliﬁ ed door unit Ref. 1145/500

The panels must be installed in ﬂ ush-mounting boxes with

module holder frames or in cases with hood for wall-mounted

versions. Refer to “Sinthesi panel” section of Doorphone and

Videodoorphone system - product technical manual.

K-Steel model

N. X Button modules Ref. 1155/11-/12A-/13A-/14A

N. 1 Module with door unit Ref. 1155/20-/21-/22A

The panels must be installed in ﬂ ush-mounting boxes with

module holder frames or in cases with hood for wall-mounted

versions. Refer to “K-Steel modular vandal-proof panel” section

of Doorphone and Videodoorphone system - product technical

manual.

725 model

N. 1 Panel with N buttons Mod. 725

N. 1 Ampliﬁ ed door unit Ref. 1128/500

For the panels references and the accessories refer to “Panels

with anodized aluminium front plate Mod. 725” section of

Doorphone and Videodoorphone system - product technical

manual.

1128 model

N. 1 Front case for door unit Ref. 1128/20-/21

N. 1 Door unit Ref. 1128/500

N. X Front case Ref. 1128/10-/11

N. X Button Ref. 1128/1-/2

For boards of accessories refer to “Wall Mounted Panel

Mod. 1128” section of Doorphone and Videodoorphone system

product technical manual.

DIAGRAM NOTES

(see section 1)

C4.001 C4.004

C4.006 C4.007

C4.008 VD.007

VX.006

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 243 244

Komentarze do niniejszej Instrukcji

Brak uwag

V-Tec VIDEO DOOR PHONE SYSTEM Instrukcja Obsługi Strona 46

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Domofony V-Tec VIDEO DOOR PHONE SYSTEM